Steam Engine Kit Small Steam Engine For( Microcosm M6-b) Live Steam Locomotive

Steam Engine Kit Small Steam Engine For( Microcosm M6-b) Live Steam Locomotive

Amazon.com Price: $360.99 (as of 04/10/2018 20:12 PST- Details)

Small Steam Engine For( Microcosm M6-B) Product Code: MicrocosmM6 Brand: Microcosm Shipping Weight: 500 g Boiler volume: 20cc Total length: 60mm Full-width: 57mm Full-height: 120mm Weight: 200g The engine number noted in: flywheel 28.5MM, output shaft 2mm Bore 4.5MM, piston stroke 7MM. Pretty nice engine with a lot of high quality parts.A very nice, I’m sure the buyer will be very pleased with this one!
Our product have to import from China and rather spent a time for shipment. If some mistake happen between shipment please contact us immediately. Because all of your problems is our responsibility. Thank you so much.
Instructions for use: 1. Engine model in the horizontal position, and to ensure that no wind conditions. Valve and unscrew the boiler above the water, that only 2/3 of the fuel capacity! Unscrew the lubricating oil cup. 2 Pull out the boiler below the burner (similar to a small drums) injection at a liquid alcohol. Ignite the alcohol burner back in place, start heating the boiler. Heating the boiler water reaches the boiling point, turn the flywheel by hand (clockwise) until the flywheel can automatically rotate in the front of the flywheel. 5 normal working hours for 12-20 minutes. Note: 1, the steam engine in the process of turning can not hand contact with any part of the engine and boiler parts, in order to avoid being scalded! 2, finished burning alcohol should be promptly cleaned up to facilitate future reuse.

Description

Steam Engine Kit Small Steam Engine For(Microcosm M6-b) Live Steam Locomotive#เครื่องจักรโมเดล…14
Small Steam Engine For( Microcosm M6-B) Product Code: MicrocosmM6 Brand: Microcosm Shipping Weight: 500 g Boiler volume: 20cc Total length: 60mm Full-width: 57mm Full-height: 120mm Weight: 200g The engine number noted in: flywheel 28.5MM, output shaft 2mm Bore 4.5MM, piston stroke 7MM. Pretty nice engine with a lot of high quality parts.A very nice, I’m sure the buyer will be very pleased with this one!
Our product have to import from China and rather spent a time for shipment. If some mistake happen between shipment please contact us immediately. Because all of your problems is our responsibility. Thank you so much.
Instructions for use: 1. Engine model in the horizontal position, and to ensure that no wind conditions. Valve and unscrew the boiler above the water, that only 2/3 of the fuel capacity! Unscrew the lubricating oil cup. 2 Pull out the boiler below the burner (similar to a small drums) injection at a liquid alcohol. Ignite the alcohol burner back in place, start heating the boiler. Heating the boiler water reaches the boiling point, turn the flywheel by hand (clockwise) until the flywheel can automatically rotate in the front of the flywheel. 5 normal working hours for 12-20 minutes. Note: 1, the steam engine in the process of turning can not hand contact with any part of the engine and boiler parts, in order to avoid being scalded! 2, finished burning alcohol should be promptly cleaned up to facilitate future reuse.